pulseaudio_8.0-0ubuntu3_amd64.deb


Advertisement

Description

pulseaudio - PulseAudio sound server

Property Value
Distribution Ubuntu 16.04 LTS (Xenial Xerus)
Repository Ubuntu Main amd64
Package filename pulseaudio_8.0-0ubuntu3_amd64.deb
Package name pulseaudio
Package version 8.0
Package release 0ubuntu3
Package architecture amd64
Package type deb
Category sound
Homepage http://www.pulseaudio.org
License -
Maintainer Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Download size 744.97 KB
Installed size 3.75 MB
PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
WIN32 systems. It is a drop in replacement for the ESD sound server with
much better latency, mixing/re-sampling quality and overall architecture.
These are some of PulseAudio's features:
* High quality software mixing of multiple audio streams with support for
more than one sink/source. May be used to combine multiple sound cards
into one (with sample rate adjustment).
* Wide range of supported client libraries. ESD, ALSA, oss, libao and
GStreamer client applications are supported as-is. Native PulseAudio
plug-ins are also available for xmms and mplayer.
* Good low latency behaviour and very accurate latency measurement for
playback and recording. Ability to fully synchronize multiple playback
streams.
* Network transparency, allowing an application to play back or record
audio on a different machine than the one it is running on.
* Extensible plug-in architecture with plug-ins for jackd, multicast-rtp
lirc and avahi, just to name a few.
This package contains the daemon and basic module set.

Alternatives

Package Version Architecture Repository
pulseaudio_8.0-0ubuntu3.10_i386.deb 8.0 i386 Ubuntu Updates Main
pulseaudio_8.0-0ubuntu3.10_amd64.deb 8.0 amd64 Ubuntu Updates Main
pulseaudio_8.0-0ubuntu3_i386.deb 8.0 i386 Ubuntu Main
pulseaudio - - -

Requires

Name Value
adduser -
libasound2 >= 1.0.24.1
libasound2-plugins -
libc6 >= 2.15
libcap2 >= 1:2.10
libdbus-1-3 >= 1.9.14
libfftw3-single3 -
libltdl7 >= 2.4.6
liborc-0.4-0 >= 1:0.4.25
libpam-systemd -
libpulse0 = 1:8.0-0ubuntu3
libsndfile1 >= 1.0.20
libspeexdsp1 >= 1.2~beta3.2-1
libstdc++6 >= 4.1.1
libsystemd0 -
libtdb1 >= 1.2.7+git20101214
libudev1 >= 183
libwebrtc-audio-processing-0 -
libx11-6 -
libx11-xcb1 -
libxcb1 -
lsb-base >= 3.2-13
pulseaudio-utils -
udev >= 143

Download

Type URL
Mirror archive.ubuntu.com
Binary Package pulseaudio_8.0-0ubuntu3_amd64.deb
Source Package pulseaudio

Install Howto

  1. Update the package index:
    # sudo apt-get update
  2. Install pulseaudio deb package:
    # sudo apt-get install pulseaudio

Files

Path
/etc/dbus-1/system.d/pulseaudio-system.conf
/etc/pulse/daemon.conf
/etc/pulse/default.pa
/etc/pulse/system.pa
/etc/xdg/autostart/pulseaudio.desktop
/lib/udev/rules.d/90-pulseaudio.rules
/usr/bin/pulseaudio
/usr/bin/start-pulseaudio-x11
/usr/lib/pulse-8.0/modules/libalsa-util.so
/usr/lib/pulse-8.0/modules/libcli.so
/usr/lib/pulse-8.0/modules/liboss-util.so
/usr/lib/pulse-8.0/modules/libprotocol-cli.so
/usr/lib/pulse-8.0/modules/libprotocol-http.so
/usr/lib/pulse-8.0/modules/libprotocol-native.so
/usr/lib/pulse-8.0/modules/libprotocol-simple.so
/usr/lib/pulse-8.0/modules/librtp.so
/usr/lib/pulse-8.0/modules/libwebrtc-util.so
/usr/lib/pulse-8.0/modules/module-alsa-card.so
/usr/lib/pulse-8.0/modules/module-alsa-sink.so
/usr/lib/pulse-8.0/modules/module-alsa-source.so
/usr/lib/pulse-8.0/modules/module-always-sink.so
/usr/lib/pulse-8.0/modules/module-augment-properties.so
/usr/lib/pulse-8.0/modules/module-card-restore.so
/usr/lib/pulse-8.0/modules/module-cli-protocol-tcp.so
/usr/lib/pulse-8.0/modules/module-cli-protocol-unix.so
/usr/lib/pulse-8.0/modules/module-cli.so
/usr/lib/pulse-8.0/modules/module-combine-sink.so
/usr/lib/pulse-8.0/modules/module-combine.so
/usr/lib/pulse-8.0/modules/module-dbus-protocol.so
/usr/lib/pulse-8.0/modules/module-default-device-restore.so
/usr/lib/pulse-8.0/modules/module-detect.so
/usr/lib/pulse-8.0/modules/module-device-manager.so
/usr/lib/pulse-8.0/modules/module-device-restore.so
/usr/lib/pulse-8.0/modules/module-echo-cancel.so
/usr/lib/pulse-8.0/modules/module-equalizer-sink.so
/usr/lib/pulse-8.0/modules/module-esound-sink.so
/usr/lib/pulse-8.0/modules/module-filter-apply.so
/usr/lib/pulse-8.0/modules/module-filter-heuristics.so
/usr/lib/pulse-8.0/modules/module-http-protocol-tcp.so
/usr/lib/pulse-8.0/modules/module-http-protocol-unix.so
/usr/lib/pulse-8.0/modules/module-intended-roles.so
/usr/lib/pulse-8.0/modules/module-ladspa-sink.so
/usr/lib/pulse-8.0/modules/module-loopback.so
/usr/lib/pulse-8.0/modules/module-match.so
/usr/lib/pulse-8.0/modules/module-mmkbd-evdev.so
/usr/lib/pulse-8.0/modules/module-native-protocol-fd.so
/usr/lib/pulse-8.0/modules/module-native-protocol-tcp.so
/usr/lib/pulse-8.0/modules/module-native-protocol-unix.so
/usr/lib/pulse-8.0/modules/module-null-sink.so
/usr/lib/pulse-8.0/modules/module-null-source.so
/usr/lib/pulse-8.0/modules/module-oss.so
/usr/lib/pulse-8.0/modules/module-pipe-sink.so
/usr/lib/pulse-8.0/modules/module-pipe-source.so
/usr/lib/pulse-8.0/modules/module-position-event-sounds.so
/usr/lib/pulse-8.0/modules/module-remap-sink.so
/usr/lib/pulse-8.0/modules/module-remap-source.so
/usr/lib/pulse-8.0/modules/module-rescue-streams.so
/usr/lib/pulse-8.0/modules/module-role-cork.so
/usr/lib/pulse-8.0/modules/module-role-ducking.so
/usr/lib/pulse-8.0/modules/module-rtp-recv.so
/usr/lib/pulse-8.0/modules/module-rtp-send.so
/usr/lib/pulse-8.0/modules/module-rygel-media-server.so
/usr/lib/pulse-8.0/modules/module-simple-protocol-tcp.so
/usr/lib/pulse-8.0/modules/module-simple-protocol-unix.so
/usr/lib/pulse-8.0/modules/module-sine-source.so
/usr/lib/pulse-8.0/modules/module-sine.so
/usr/lib/pulse-8.0/modules/module-stream-restore.so
/usr/lib/pulse-8.0/modules/module-suspend-on-idle.so
/usr/lib/pulse-8.0/modules/module-switch-on-connect.so
/usr/lib/pulse-8.0/modules/module-switch-on-port-available.so
/usr/lib/pulse-8.0/modules/module-systemd-login.so
/usr/lib/pulse-8.0/modules/module-tunnel-sink-new.so
/usr/lib/pulse-8.0/modules/module-tunnel-sink.so
/usr/lib/pulse-8.0/modules/module-tunnel-source-new.so
/usr/lib/pulse-8.0/modules/module-tunnel-source.so
/usr/lib/pulse-8.0/modules/module-udev-detect.so
/usr/lib/pulse-8.0/modules/module-virtual-sink.so
/usr/lib/pulse-8.0/modules/module-virtual-source.so
/usr/lib/pulse-8.0/modules/module-virtual-surround-sink.so
/usr/lib/pulse-8.0/modules/module-volume-restore.so
/usr/lib/systemd/user/pulseaudio.service
/usr/lib/systemd/user/pulseaudio.socket
/usr/lib/x86_64-linux-gnu/pulseaudio/libpulsecore-8.0.so
/usr/share/alsa/pulse-alsa.conf
/usr/share/alsa/alsa.conf.d/pulse.conf
/usr/share/apport/package-hooks/source_pulseaudio.py
/usr/share/bash-completion/completions/pacat
/usr/share/bash-completion/completions/pacmd
/usr/share/bash-completion/completions/pactl
/usr/share/bash-completion/completions/padsp
/usr/share/bash-completion/completions/paplay
/usr/share/bash-completion/completions/parec
/usr/share/bash-completion/completions/parecord
/usr/share/bash-completion/completions/pasuspender
/usr/share/bash-completion/completions/pulseaudio
/usr/share/bug/pulseaudio
/usr/share/doc/pulseaudio/NEWS.Debian.gz
/usr/share/doc/pulseaudio/NEWS.gz
/usr/share/doc/pulseaudio/README
/usr/share/doc/pulseaudio/README.Debian
/usr/share/doc/pulseaudio/changelog.Debian.gz
/usr/share/doc/pulseaudio/copyright
/usr/share/doc/pulseaudio/examples/pulseaudio.default.example
/usr/share/doc/pulseaudio/examples/pulseaudio.init.example
/usr/share/doc/pulseaudio/examples/pulseaudio.upstart.example
/usr/share/lintian/overrides/pulseaudio
/usr/share/man/man1/pulseaudio.1.gz
/usr/share/man/man1/start-pulseaudio-x11.1.gz
/usr/share/man/man5/default.pa.5.gz
/usr/share/man/man5/pulse-cli-syntax.5.gz
/usr/share/man/man5/pulse-client.conf.5.gz
/usr/share/man/man5/pulse-daemon.conf.5.gz
/usr/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic-always.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common
/usr/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common
/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker-always.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf
/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common
/usr/share/pulseaudio/alsa-mixer/paths/hdmi-output-0.conf
/usr/share/pulseaudio/alsa-mixer/paths/hdmi-output-1.conf
/usr/share/pulseaudio/alsa-mixer/paths/hdmi-output-2.conf
/usr/share/pulseaudio/alsa-mixer/paths/hdmi-output-3.conf
/usr/share/pulseaudio/alsa-mixer/paths/hdmi-output-4.conf
/usr/share/pulseaudio/alsa-mixer/paths/hdmi-output-5.conf
/usr/share/pulseaudio/alsa-mixer/paths/hdmi-output-6.conf
/usr/share/pulseaudio/alsa-mixer/paths/hdmi-output-7.conf
/usr/share/pulseaudio/alsa-mixer/paths/iec958-stereo-output.conf
/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf
/usr/share/pulseaudio/alsa-mixer/profile-sets/force-speaker-and-int-mic.conf
/usr/share/pulseaudio/alsa-mixer/profile-sets/force-speaker.conf
/usr/share/pulseaudio/alsa-mixer/profile-sets/kinect-audio.conf
/usr/share/pulseaudio/alsa-mixer/profile-sets/maudio-fasttrack-pro.conf
/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf
/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf
/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-korecontroller.conf
/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio10.conf
/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio2.conf
/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio6.conf
/usr/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktorkontrol-s4.conf
/usr/share/pulseaudio/alsa-mixer/profile-sets/sb-omni-surround-5.1.conf
/usr/share/zsh/vendor-completions/_pulseaudio

Changelog

2016-03-21 - David Henningsson <david.henningsson@canonical.com>
pulseaudio (1:8.0-0ubuntu3) xenial; urgency=medium
* Drop 0023-fixing_snd_mixer_poll_descriptors_count_when_zero.patch 
- Upstreamed
* 0024-alsa-mixer-Quick-workaround-for-potential-index-out-.patch
- Fix a potential index-out-of-bounds when reading multichannel mixers
* 0100-switch-on-port-available-Switch-from-HDMI-to-analog-.patch
- Improve an 8.0 routing regression 
2016-02-11 - Luke Yelavich <themuso@ubuntu.com>
pulseaudio (1:8.0-0ubuntu2) xenial; urgency=medium
* 0600-droid-sync-with-upstream-for-Android-5-support-and-b.patch:
- Fix build failure by changing pa_strlist_tostring calls to
pa_strlist_to_string
2016-02-10 - Luke Yelavich <themuso@ubuntu.com>
pulseaudio (1:8.0-0ubuntu1) xenial; urgency=medium
* New upstream release
* Merge from Debian experimental, remaining changes:
- epoch (my stupid fault :S)
- Don't ship the consolekit module, and explicitly depend on the PAM
systemd module
- Add a module to allow pulseaudio to use the Android audio HAL
- Adjust gbp.conf file to point to the ubuntu branch for package builds
- Disable module-role-cork by default
- Load module-x11-bell in the start-pulseaudio-x11 script
- Hide pulseaudio from startup apps dialog
- Quit daemon if pid file is removed
- Avoid abort when poll descriptor is 0, such as when using it with the
audioflinger bridge, like done in ubuntu touch
- change default rlimit_rttime value to 200 ms
- Don't probe UCM profiles, trust that the profile writer knows what they
are doing
- Add card hook to allow modules to do something before a profile becomes
active
- Add an option to the bluez4 discovery module to set the profile
- Allow leaving bluetooth transport running while sink and source are
suspended.
- Add option to module-switch-on-connect to skip abstract devices
- Add property to module-device-restore to skip store/restore
- Add missing fields for sink_input/source_output info struct to the vala
bindings
- Add example upstart job to run pulseaudio in system mode
- Add a build/run autopkgtest for libpulse-dev
- Drop libsoxr-dev build dep, its in universe
* Refreshed patches, and dropped those that were applied upstream.
* Update local shlibs file for 8.0
2016-01-15 - Felipe Sateler <fsateler@debian.org>
pulseaudio (7.99.2-1) experimental; urgency=medium
* New upstream release candidate
* Drop build-sys-Fix-install-order-of-libpulsecore.patch, applied
upstream
2015-12-28 - Felipe Sateler <fsateler@debian.org>
pulseaudio (7.99.1-1) experimental; urgency=medium
* New upstream release candidate
- Update local shlibs file for 7.99
- libpulsecore is now installed in the package-private directory
- Update symbols file to add new balance functions
* Drop pulsecore related lintian overrides
* Drop stale pulseaudio-dev.install file
* Drop stale lintian overrides
* Add patch to fix install order of libpulsecore
2015-11-06 - Felipe Sateler <fsateler@debian.org>
pulseaudio (7.1-2) unstable; urgency=medium
* Add build-depends on libsoxr-dev to enable soxr resamplers.
Closes: #804212
2016-02-05 - Matthias Klose <doko@ubuntu.com>
pulseaudio (1:7.1-1ubuntu7) xenial; urgency=medium
* Keep the libpulsecore library in the multiarch libdir.
2016-02-01 - Simon Fels <simon.fels@canonical.com>
pulseaudio (1:7.1-1ubuntu6) xenial; urgency=medium
* debian/patches/60*.patch:
+ Add proper dep3 patch header to all patches.
* debian/control:
+ Only depend on android-headers for i386, amd64 and armhf as no
other platform actually uses it or provides hybris support.
2016-01-28 - Simon Fels <simon.fels@canonical.com>
pulseaudio (1:7.1-1ubuntu5) xenial; urgency=medium
* debian/pulseaudio-module-droid.install:
- Correctly install all droid modules which have changed names
after we're now supporting multiple Android versions.

See Also

Package Description
pxelinux_6.03+dfsg-11ubuntu1_all.deb collection of bootloaders (PXE network bootloader)
pycadf-common_2.2.0-1_all.deb implementation of DMTF Cloud Audit (CADF) data model - common files
pyotherside-doc_1.4.0-2_all.deb asynchronous Python 3 Bindings for Qt 5 (documentation)
pyotherside_1.4.0-2_all.deb transitional dummy package
python-alembic_0.8.2-3ubuntu1_all.deb lightweight database migration tool for SQLAlchemy - Python 2.x
python-all-dev_2.7.11-1_amd64.deb package depending on all supported Python development packages
python-all_2.7.11-1_amd64.deb package depending on all supported Python runtime versions
python-amqp-doc_1.4.9-1_all.deb Low-level AMQP client (Documentation)
python-amqp_1.4.9-1_all.deb Low-level AMQP client
python-anyjson_0.3.3-1build1_all.deb Common interface for the best available JSON implementation
python-appconf-doc_1.0.1-4_all.deb helper class handling configuration defaults of apps - transition package
python-appdirs_1.4.0-2_all.deb determining appropriate platform-specific directories (Python 2)
python-apport_2.20.1-0ubuntu2_all.deb Python library for Apport crash report handling
python-apt-common_1.1.0~beta1build1_all.deb Python interface to libapt-pkg (locales)
python-apt-dev_1.1.0~beta1build1_all.deb Python interface to libapt-pkg (development files)
Advertisement
Advertisement